Auri Energy

Search Auri Energy

40 pages to explore

Transformer and feeder monitoring

Understand how each feeder and phase contributes to the load on a distribution transformer. Give operations and planning teams a closer view of the circuits that supply their customers.

Power quality

Connect voltage complaints and power-quality events to the equipment, phases and operating conditions behind them.

Fault and outage investigation

Relate a feeder interruption, fuse event or breaker indication to the part of the network it affects and the information the field team needs.

Energy balance and loss investigation

Compare feeder energy with the meters supplied by that circuit, then examine the difference with technical losses and data coverage in view.

Transformer asset intelligence

Understand repeated overload, phase imbalance and the conditions that contribute to transformer stress before deciding what to inspect or replace.

Metering and field integration

Make meter records more useful by relating them to feeders, phases and transformer areas, alongside the equipment already in the field.

SCADA and station integration

Connect existing relays, RTUs, meters and station systems with local records and the broader Cetus network view.

Secure operations and lifecycle

Bring equipment identity, access, configuration and update records into a controlled engineering process.

Grid twins and network planning

Bring equipment, connections, measurements and assumptions together before assessing a change to the grid.

Grid capacity coordination

Bring distribution constraints, transmission needs and connected-resource availability into a shared capacity discussion.

Generation and connection coordination

Connect generation units, plant equipment and availability information with the constraints at the agreed grid connection.

Install & commission

Plan the transition from installed equipment to an accepted operating system.

Upgrade, repair & extend

Develop a practical route from an existing installation to the functions it needs next.

Training & development

Build understanding across the people who design, commission and operate the system.

Consultancy services

Turn a broad modernisation ambition into an engineering brief.

Grid modernisation & digital transformation

Create a migration path that respects the network already in service.

System studies & network planning

Start a network study with a model the engineering team can trust.

Renewable & distributed energy integration

Understand new generation in the context of its connection.

Digital twin & data strategy

Give every observation a place in the electrical model.

System integration & technology roadmapping

Make integration a designed interface, rather than a hidden dependency.

Infrastructure assessment & asset life extension

Assess what is worth retaining before planning replacement.

Electronics development

Develop electronics around the signal, power and environment the product must handle.

Product enclosures

Treat the enclosure as part of the electrical and service design.

FPGA development

Match programmable logic to the timing and data path the application needs.

Firmware design

Connect the physical product to predictable, maintainable behaviour.

System design

Bring hardware, software and operations into one requirement.

Product design

Carry the intended use through to the physical product.

Cabinet edge controller

Bring feeder, breaker, metering and cabinet observations together. Keep local analytics, retained history and communication close to the transformer.

Feeder monitor

See current, voltage, power and energy at the individual feeder. Relate phase imbalance, loading and power-quality records to the circuit that needs attention.

Breaker control unit

Connect switching indications and supervised breaker interfaces with the equipment and event they describe. Keep the requested action and resulting feedback clear.

Serial telecontrol and IED gateway

Connect installed meters, relays, compact RTUs and other serial equipment with the Cetus network view through a defined integration profile.

Substation automation gateway

Bring Ethernet-connected IEDs, relays and station automation into a common operating picture, with their identity, timing and source information intact.

Meter integration interface

Relate meter readings to the circuit they measure. Support missing-read and energy-balance investigations with clearer network associations.

Three-phase fused switching

Plan outgoing switching ways alongside the monitoring and supervision the cabinet needs. Keep the electrical arrangement and equipment requirement together.

Cetus Platform

Edge, Central, network views, grid twins and local analytics

Solutions for grid operators

DSO, TSO and generation company / IPP operating context

Engineering services

Pilot assessment, integration, commissioning, training and lifecycle

About Auri Energy

The company and our engineering approach

Resources

Documentation, cabinet configuration and demonstration requests

Contact Auri Energy

A tracked enquiry for sales, engineering, partnerships or support

Product engineering

Product enclosures

Treat the enclosure as part of the electrical and service design.

From requirement to a working plan

Consider mounting, thermal paths, cable entry, access and the installation environment alongside the electronics. Review the assembly and maintenance process before settling the physical arrangement.

When this service helps

Useful when electronics, cabling, mounting and service access need to work within the same physical product. The enclosure design has to support installation and maintenance as well as appearance.

The starting point is your installation and the work your team needs to do. We agree the scope, responsibilities and review points before defining the delivery.

Discuss this service

Build the scope together

  1. 01Mechanical and environmental requirements
  2. 02Mounting, access and thermal considerations
  3. 03Assembly and manufacturing review

What you take forward

A mechanical design requirement addressing mounting, thermal paths, cable entry, access and manufacturing review.

Delivery is defined around an agreed requirement, responsibilities and review points. Bring the available drawings, equipment information or project brief to the first discussion.

One engineering chain

Equipment and software belong in the same conversation.

Our field hardware and the Cetus Platform provide a shared context for discussing integration, observations and operating requirements.

Explore the hardware
Explore Cetus Platform
All services and consulting

Start with your network

Let’s work on what matters.

Talk to Auri Energy

Auri Energy · Cetus Platform

You can browse and send requests without accepting optional storage. Choices apply separately to each website and are remembered for up to 180 days.

Essential storage Always active

Records this choice so we do not ask on every page. It contains the policy version, your preference and the time of the choice.

Allows this website to remember your selected light or dark appearance between visits. Without permission, you can still change the theme for the current page.

Analytics and advertising Not used

No visitor analytics, advertising cookies or embedded third-party maps are loaded by these public websites.

Read the Cookie Policy